 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 0.75 Watt Miniature SIP DC/DC Converter ! HPR4XX Corporate: www.cdtechno.com Product: www.cdpoweronline.com High Isolation Voltage: 3000 VPK Test Single-In-Line Package (SIP) Internal Input and Output Low Cost ! ! Non-Conductive Case High Output Power Density: 10 Watts/Inch3 Extended Temperature Range: -25C to +85C High Efficiency to 79% ! ! ! ! ! The HPR4XX Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 170kHz push-pull oscillator is used in the input stage. The HPR4XX Series reduces beat-frequency oscillation problems when used with high frequency isolation amplifiers. Reduced parts count and high efficiency add to the reliability of the HPR4XX Series. The high efficiency of the HPR4XX Series means less internal power dissipation, as low as 190mW. With less heat to dissipate the HPR4XX Series can operate at higher temperatures with no degradation of reliable operation. In addition, the high efficiency of the HPR4XX Series means the series is able to offer greater than 10 W/inch3 of output power density. Operation down to no load will not impact the reliability of the series, although this product has a >1mA minimum load for specifications purposes. The HPR4XX Series provides high isolation in a very small package. The use of surface mounted devices and manufacturing technologies makes it possible to offer premium performance and low cost. SPECIFICATIONS All specifications are typical at TA = +25C nominal input voltage unless otherwise specified. PRODUCT SELECTION CHART NOMINAL INPUT VOLTAGE (VDC) RATED OUTPUT VOLTAGE (VDC) RATED OUTPUT CURRENT (mA) INPUT CURRENT (mA) NO LOAD (mA) RATED LOAD TYP MAX 216 212 212 218 212 220 90 81 81 88 81 81 72 72 72 72 63 63 48 48 45 45 45 45 235 235 235 245 235 220 100 90 90 98 90 90 80 80 80 80 70 66 53 53 50 50 50 50 REFLECTED RIPPLE CURRENT (mAp-p) 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 15 15 15 15 15 15 EFFICIENCY (%) 69 70 71 68 68 75 69 77 77 71 74 77 69 69 69 69 76 79 65 65 69 69 67 69 1 MODEL HPR400 5 5 150 20 HPR401 5 12 62 20 HPR402 5 15 50 20 HPR403 5 5 75 20 HPR404 5 12 30 20 HPR405 5 15 25 20 HPR406 12 5 150 10 HPR407 12 12 62 10 HPR408 12 15 50 10 HPR409 12 5 75 10 HPR410 12 12 30 10 HPR411 12 15 25 10 HPR412 15 5 150 8 HPR413 15 12 62 8 HPR414 15 15 50 8 HPR415 15 5 75 8 HPR416 15 12 30 8 HPR417 15 15 25 8 HPR418 24 5 150 8 HPR419 24 12 62 8 HPR420 24 15 50 8 HPR421 24 5 75 8 HPR422 24 12 30 8 HPR423 24 15 25 8 NOTE: Other input to output voltages may be available. Please consult factory. Product: www.cdpoweronline.com HPR4XX REV G 1/03 SPECIFICATIONS, ALL MODELS Specifications are at TA = +25C nominal input voltage unless otherwise specified. PARAMETER INPUT INPUT Voltage Range CONDITIONS MIN 4.5 10.8 13.5 21.6 TYP 5 12 15 24 750 MAX 5.5 13.2 16.5 26.4 UNITS VDC VDC VDC VDC mW % mVp-p mVrms mVp-p VDC VDC VDC %/C %/%Vin % % OUTPUT Rated Power Voltage Setpoint Accuracy Ripple & Noise HPR403 Voltage (Over Input Voltage Range) OUTPUT Rated Load, Nominal VIN BW = DC to 10MHz BW =10Hz to 2MHz BW = DC to 10MHz 1mA Load, VOUT = 5V 1mA Load, VOUT = 12V 1mA Load, VOUT = 15V 5 45 30 90 7 15 18 .01 Temperature Coefficent REGULATION Line Regulation Load Regulation (5V out only) Load Regulation (All other modes) GENERAL ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current Switching Frequency Frequency Change Package Weight MTTF per MIL-HDBK-217, Rev. E* Ground Benign TEMPERATURE Specification Operation Storage High Line to Low Line Rated Load to 1mA Load Rated Load to 1mA Load 1 10 3 60 Hz, 60 Seconds 1000 3000 10 15 2 170 24 2 7.9 -25 -40 -40 +25 +85 +100 +110 VISO= 240VAC, 60Hz Over Line and Load Circuit Stress Method TA = +25C 7 VDC Vpk G pF Arms kHz % g MHr C C C GENERAL * For demonstrated MTTF results reference: Power Convertibles Reliability Report HPR105. ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation ................................. 450mW ShortCircuitDuration ........................................... Momentary Lead Temperature (soldering, 10 seconds max .+300C * * NOTE: Refer to Reflow Profile for SMD Models. ORDERING INFORMATION HPR 4XX Device Family HPR Indicates DC/DC Converter Model Number Selected from Table of Electrical Characteristics Product: www.cdpoweronline.com HPR4XX REV G 1/03 2 TYPICAL PERFORMANCE CURVES Specifications are at TA = +25C nominal input voltage, nominal load, recommended external components applied, unless otherwise specified. (Refer to Application Note DCAN-9 at www.cdpowerelectronics.com) VOUT VS LOAD (5Vout Models) 5.7 5.5 5.4 5.2 VOUT VS LOAD (5Vout Models) 12.5 12.4 12.3 VOUT VS LOAD (12Vout Models) Vout Vout Vout 0 20 40 60 80 5.3 5.1 4.9 0 40 80 120 160 Output Current (mA) VOUT VS LOAD (12Vout Models) 12.6 12.5 12.4 5.0 4.8 12.2 12.1 12.0 4.6 Output Current each load (mA) VOUT VS LOAD (15Vout Models) 15.9 15.7 11.9 0 20 40 60 80 Output Current each load (mA) VOUT VS LOAD (15Vout Models) 16.5 16.0 15.5 Vout 12.3 12.2 12.1 12.0 0 10 20 30 40 Output Current each load (mA) Vout Vout 15.5 15.3 15.1 14.9 0 20 40 60 80 Output Current each load (mA) OSCILLATION FREQUENCY VS TEMPERATURE 220 15.0 14.5 14.0 13.5 0 0.2 0.4 0.6 0.8 1.0 Output Power each load (Watts) EFFICIENCY VS LOAD 90 75 Frequency (KHz) 20 40 60 80 Efficiency (%) 60 45 30 15 0 0 100 % of Rated Load (%) 200 180 160 140 -30 0 30 Temperature (C) 60 90 SAFE OPERATING AREA 600 LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) 60 LOAD CAPACITANCE vs INPUT RISE TIME (15 Vout models) 500 50 Total Load Capacitance (uF) Total Load Capacitance (uF) 400 40 300 30 SAFE OPERATING AREA 200 SAFE OPERATING AREA 20 100 10 0 0 5 10 15 20 25 30 35 Rise Time of Input Voltage (mS) 40 45 50 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) 90 NOTES: 1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of HPR4XX devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steadystate value. 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. Total Load Capacitance (uF) 80 70 60 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) SAFE OPERATING AREA Product: www.cdpoweronline.com HPR4XX REV G 1/03 3 MECHANICAL 0.770.010" (19.560.25) FRONT VIEW 0.2400.010" (6.090.25) RIGHT SIDE VIEW 0.4000.010" (10.160.25) 12 0.020.002" (0.510.05) 567 0.180.015" (4.570.38) 0.0200.010" (0.510.25) 0.140" MIN (3.56) 0.0100.002" (0.250.05) 0.0350.015" (0.890.38) BOTTOM VIEW PIN CONNECTIONS 1. 2. 5. 6. 7. +VIN -VIN -VOUT COM* +VOUT *Common pin not present on single output models. Notes: All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: 0.015" Power Electronics Division, Americas 3400 E Britannia Drive, Tucson, Arizona 85706 Tel: 800.547.2537 Fax: 520.295.4197 C&D Technologies, EMEA/AP Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user's intended purpose and in user's specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications. Product: www.cdpoweronline.com HPR4XX REV G 1/03 4 |
Price & Availability of HPR406
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |